CRAFT YOU.

SEEK YOUR CREATIVE SPACE WITH TENCRAFTYFINGERS

A Happy Accident October 9, 2011

So….this card, although it doesn’t look like it, is a happy accident.

You see that top strip of embossed paper that is added as a layer?  On the original card, it wasn’t a layer at all.  I embossed directly on the card and used blue masking tape in an effort to do a little masking.  However, everything was fine until I went to remove the tape.  I think that using the heat gun actually had a bit of an adverse reaction on the tackiness of the tape.  It was the first time that I’ve ever had an issue with removing it.

Instead of chucking the whole thing, I cut a strip of the original embossed image and made it small enough to fit on top of some beautiful large-width gray satin ribbon.  I added some of the extra that was destined for the recycling bin to the bottom as an added detail.

Yeah, I could of scrapped the whole thing, but I had worked too hard on all of that embossing.  And well, I am a “scrap”booker aren’t I?  :)   I think that if I ever want to combine a lot of embossing and masking in the future, I will use some thin paper instead.

So what do you think?

 

It’s Not Snowing…..Yet August 21, 2011

But soon it will be.

I had no trouble with this layout as I kinda had a good idea of what I wanted to do.  (That always helps, doesn’t it? ;)   In any case, while I wasn’t 100% happy with my stamping job, its always fun to work with different applications of paint, especially the fun kind that comes in spray bottles!  I used a little Tattered Angels and Mister Huey’s from Studio Calico.  And then I mixed a quick concoction of white acrylic paint and a little water and created the larger, splotchy “snowballs.”  I used some scraps up and cut several different sizes of circles and used them as masks to leave room for the embossing.  I really like the way it turned out.

In other news, I’ve finally gotten caught up with my son’s scrapbook.  The bad news?  I now only have about 8 months to get caught up with the next one.  Oh well…a mama’s job is never done!

 

From One Newbie to Another: Ten Tips for Attending a Scrapbooking Convention July 31, 2011

Filed under: Just a Thought,Tell Me Tip — tencraftyfingers @ 6:36 PM
Tags: , , ,

I did it!  I finally took some time out and attended a major scrapbooking event!

It was a busy week overall for me.  I had just gotten back from another conference for my “real” job and then poof!  I was off to spend time at the work I really love to do.

Because of my job, I knew that my time at the CKC would going to be limited.  However, with a game plan and a few pre-determined goals, I would make the best of my experience.  And now that I’m less of a newbie than I used to be, I would love to share some tips to help the less experienced get exactly what they want out of the time that they spend at a conference.

Gotta have Webster's and Graphic 45. Embellies by Crate Paper.

Tip 10: Begin with the End in Mind

What’s the point? What do you hope to get out of your time at your chosen event? While it may sound like it is easy to answer, there is a ton of things to do at an event like CKC.  Of course there’s lots of shopping and classes, but there are also demos and make-n-takes and cropping opportunities.  Sometimes your budget determines what you can really can take advantage of but the key is figuring out exactly what it is that you want to do.  Me? I wanted lots of crafty professional development.

Tip 9: Bring Provisions and Stake Out Necessities

What’s your plan for taking care of yourself between class time and shopping time?  If you decided to spend most of your time in classes like I did, it really doesn’t leave a lot of time for lunch.  For me that wasn’t a big deal–I rarely stop for lunch on a regular day–but for others, that’s an absolute non-negotiable.  While I wasn’t terribly hungry at the end of the day, having a snack or two would have been a good idea.  The hotel had plenty of water stations available, so that was a big help;  and, I tucked a jacket away in my bag which was a lifesaver in the chilly classrooms.  But if you need to use elevators or often need bathroom breaks, then you should absolutely find out where these facilities exist before you get your day started.  When in doubt, ask a fellow participant or consult the information desk.

Tip 8: Mind the Gap

In preparing to depart, you should know all the finer details of what lies ahead.  For example, since this event is about an hour and half away from my home and I planned to drive, so I was prepared to spend the extra money in gas.  But, I had no idea that I would be spending almost $20 total in tolls.  (I was expecting about half that amount.)  I did, however, take time to read the fine print that is provided when you register for the event and I knew beforehand that I couldn’t take my rolling cart onto the main shopping floor.  I also had to make sure my laptop was fully charged for my Adobe Photoshop Elements class because I may not have had access to an electrical outlet.  And even though I wasn’t enrolled in a traditional scrapabooking class, I was glad when I bought my basic kit to my Copics class because I needed ink and adhesive.  It always pays to read the fine print. (I sound like a commercial…HA!)

Some cute clear stamps and a CD of digi templates

Tip 7: Create a Game Plan

Here’s where you really get to personalize your experience.  Once you figure out exactly what your schedule will look like, the next thing to review is a list of the vendors.  While many of the vendors may be local to the area, large events will draw quite the gamut of sellers.  Some vendors have only one product to sell you; others have a little bit of everything.  If you already know what you are looking for, then you can focus on where exactly you want to go and maximize your time.  It is also a great opportunity to get up close and personal with a national company.  Or, you can get finally get a first-hand look at those new product lines you’ve been eying.

The New Authentique Line

October Afternoon's Rocket Age

Tip 6: Don’t Forget the Extras!

Lots of vendors will have demonstrations throughout the day and some have craft stations where you can try some of their products or simply get inky or glittery.  However, the most fun are all the raffles.  I think I spotted about 15 – 20 or so different giveaways going on all at once! And if your are lucky enough to stay towards the end of the event, lots of vendors put things on sale just to help product move out the door.  If you’ve been eying something, a motivated seller might be willing to make a deal. You could walk away winning something for nothing or getting something for half price.

Tip 5: Make Friends!

Besides the classes, I have been wanting to make more crafty friends, especially ones that live nearby that I can crop or attend events with.  So one of my other reasons for going to the convention was to connect to people.  I had only been there 10 minutes and I introduced myself to a couple of ladies in a booth shopping.  We all were interested in some unique clear stamps. (Yes I bought a few….HA!)

There really is such a camaraderie in this industry and if you’re into sharing the love of this craft, then it will be super easy to make friends.  If nothing else, it’s nice to be around others who “speak your language.” Isn’t that so refreshing? I don’t have any other scrapbookers in my family and friends circle, so although they appreciate my affection, they can’t really relate.  Nor can they understand why I have to buy that new trimmer, or ribbon, or pen, or cutting mat, or polka dot paper or…..you get the point. But I digress…

This is also a good time to have a few business cards on hand.  It actually doesn’t matter what they look like really, they just need to have your contact information on them.  (Although I have updated cards, I only remembered to bring older ones–doh!–but they still worked.) And in my second Copics class, I made good use of the them–one for the teacher and one for Julie who sat next to me in class.  We had a great few hours in class together and now I have someone to meet up again with next year.

Tip 4: Stay Awhile

Because of my “real” job, I didn’t spend as nearly as much time at the conference as I wanted or really needed to.  In the one day I attended, I took three classes and had very little time to do anything else.  I did get to do some shopping….

Ink, paper and stamps from Studio Calico.

Stamps and dies from Clear and Simple Stamps.

but there was a lot that I couldn’t take advantage of.  While I met my goals for the day, next year I hope to return and spend at least one more full day at the conference.  That way I can maybe spend one day in classes and another day on the main floor.  The other reason why this might be a good idea is because since we weren’t allowed to bring rolling totes onto the main floor, I ended up carrying my class supplies and anything else that I either purchased or was given on my shoulder…all day.  And even though I went out to my car once to drop some stuff off, my shoulder is killing me today.  Ouch!

Tip 3: Bring a Camera

This little tip might be the best of all.  I brought my camera, almost as an afterthought, but it came in handy in several ways.  I took pictures of samples,

Copic class samples

and a quick picture with Vee Jennings, a member of Studio Calico’s amazing design team,

and generally got some visual insight into what people are crafting these days.  Your camera will remember long after you forget.  And remember, inspiration is always free.

Tip 2: Expect the Unexpected

Remember that tip about reviewing the vendor list? While I wasn’t surprised about many of the vendors, I was surprised that there would be a few direct marketing-sellers like Close to My Heart on the main floor.  If you are a loyal customers of CTMH, then you can stock up on your favorite supplies.  I spent time shopping at a vendor that sold nothing but Spellbinders dies and accessories and another that sold only Fiskars products.  There were vendors that only sold pre-assembled page kits and laser die-cuts.  One vendor only sold software–all of the product was nothing more than a medium-size bin of CDs. One of the more interesting booths was for Scrapbuck, which boasts selling products for as low as a buck.  Think of it as a dollar store for scrapbooking supplies.  Kinda genius…

Tip 1: Everything is not for Everybody

Or in other words, if it isn’t fun, then why do it?  There is a lot to do but that doesn’t mean that you have to do everything.  So pick and choose what you end up doing. At the end of the day although I was exhausted from the driving and the walking and the hauling, I had a fantastic time.  I left feeling fulfilled and happy.  The energy was great.  The people were fabulous.  And so yes, I had fun.  So. much. fun.  And while everything isn’t for everybody, I will definitely be going again next year.

So what are you waiting for? :)

 

Programs, Pins and Pinstripes June 19, 2011

June has been a busy month, but I don’t think that it’s been any more busy for me than anyone else.  Lots of brides and dads, lots of beautiful flowers (and the pollen that goes with it…) and I’ve been dealing with all of it.

First things first–my wonderful younger brother got married yesterday so I have a brand new sister-in-law! I’m very excited about everything, but more than that, I’m just so supportive of my brother and his new bride. They are both beautiful people and I wish them much deserved happiness.

As most young couples planning a wedding, money only goes a short way.  My gift to them was to create their invitations (with all the needed extras) as well as programs for the wedding and a few other little things that they wanted.  This process in creating each handmade, hand-stamped piece of paper was tedious and intricate but it was worth it–because I could stamp a little love on each piece.

Here are the things that I learned in creating custom invitations, etc.:

  • It is important to remember to keep the overall design simple, because you will have to replicate it at least a hundred times
  • While the bride (and maybe the groom) may ask for lots of different things, you have to consider the cost and effort it will take to make good on the request (let your gut be your guide; luckily for me, my new SIL made things very easy)
  • If costs are a consideration, explore various sizes for your final design; calculate how many different pieces can you get out of one 12×12 sheet of cardstock or paper
  • Simple touches go a long way so use items like ribbon and embossing powder as extensively as possible
  • Make sure you have enough to go around–if you are doing a lot of printing, for example, you will probably need a few cartridges of ink to get everything covered
  • Don’t forget your calling card!  Negotiate where you can place your brand.  Perhaps you can make your business cards available at a reception or you could include a small, tasteful business stamp somewhere on the product.

At the end of the day, you should attempt to deliver your client’s vision before promised and at or below budget.  Luckily for my brother and his new bride, I was able to deliver to their satisfaction!

I was able to personalize these programs with the same ribbon that I used on the original invitation, I used the same plum-colored paper from The Paper Source, and I embossed the feather stamp with the same color embossing powder that was used on the other materials.

While I definitely helped behind the scenes, I chose let my son, who acted as the ring bearer, take the spotlight.  However, I thought that it was important dress myself appropriately and stay close to the color scheme of the wedding.  So I pulled an oldie-but-goodie from the closet (we won’t talk about what it took to actually get into this frock!) and jazzed up my accessories, namely my hair.  I am not the type of girl to fuss for hours in a salon, although I did spend some time in one getting ready for the wedding.  And… I did want to get myself as primped as possible because I know that it will probably be a long time before I spend that much time and attention solely on myself.  To that end, I decided to make some special hairpins using some hot glue and a few flower picks from the local craft store. The result?

A very simple but pretty adornment that looked effortless to create.  I didn’t take the time count how many I made, but I suppose it was about 30 or so and it only took me about an hour after I got going.  With these beautiful hydrangea petals, I wanted to use the color of my dress to complement the lavender/purple theme of the wedding.  These were pretty simple to create:

  1. Before purchasing, look at how the petals are attached to the pick; they should be easy to remove
  2. Choose what you think you will need, but add another pick or two–it’s better to be safe than sorry!
  3. Choose a good, quality pin that is the right type and color for your hair
  4. Once you remove the petal from the stem, figure out the best way to glue it onto the pin. I removed the individual petals and then cut a small piece of the original attachment to get the flattest surface possible.
  5. Once your glue is ready to go, try to attach the petals using a couple of different methods and see which one seems to hold up the best.
  6. Allow adequate drying time, but if you are using hot glue this shouldn’t take long at all.
  7. Pin to your hair as desired and get beautified!

I was trying to think how else to use this pins after I got home. They could make pretty bookmarks, don’t you think? :)

Last but not least, as part of my continued commitment to the Glue Dots team, I created this pinstriped-project just for dear old Dad:

The hardest and longest part of this quick craft was getting the die cut letters cut out.  With the help of my Cricut, it didn’t take me long at all.  Once you’ve got the letters cut and adhered with Glue Dots, you simply use whatever size Glue Dots that you like to decorate the letters.  In this case, I used some to help adhere metal beads.  You could also use glitter or confetti dots or anything else that you would like and simply press down on the Glue Dot to make sure that it stays.  Add your magnets and voila…and instant surprise for dad to find!

There you have it. I told you I was busy!

 

Let It Snow December 5, 2010

Just a quick one this time…I’m caught somewhere between a house full of colds, looming deadlines, and a few piles of laundry and other housework.  This is one of my latest projects as part of the Glue Dots Dottess team:

Sweet, right?  Sometimes you need a quick gift to give and traveling down the pre-fab aisle always gives me a bit of inspiration.  I love taking the really cheap wood items off the shelf, adding a little paint or paper to them, and seeing what I come up with.

The really special thing about this one? Using Glue Dots in a way that I’ve never used them before–not as adhesive, but as an embellishment.  Basically, I just attached each dot where I wanted it and embossed with a little powder.  Here are some step-by-step directions:

 

Supplies needed–

 

Wooden frame (from any craft store)
Acrylic paint (pure white)
Hampton Art embossing powder (sky blue)
Distress ink (Broken China)
Sharpie paint pens
Heidi Swapp chipboard letters
Jolee’s stickers
Glue Dots®
Prepare wood frame and paint. Allow it to dry completely and add Distress ink as desired with a foam applicator.  Let ink dry and draw a simple cross pattern lightly with a pencil. Paint pencil lines with silver Sharpie paint pen. Add mini Glue Dots® where lines intersect. (It is easiest to do this in sections; make sure to maintain the shape of the Glue Dots® as you apply them directly to the frame and gently press flat.) Add embossing powder to dots and use a stiff paintbrush to remove the excess powder. Heat carefully with a heat tool. It is normal for the adhesive to bubble and slightly reshape. Once the frame is covered, add chipboard letters as desired using mini Glue Dots®.  Embellish using snowflake stickers.
 

Thankful for You November 21, 2010

Filed under: Cardmaking,Just a Thought,Tell Me Tip — tencraftyfingers @ 10:58 PM

This sweet little craft can be made with just the right measurements and  some scrap paper.  You might find it helpful if the scraps coordinate, but they don’t necessarily have to.  Use some simple stamping (or embossing) to add extra flair. 

When I designed it, I had the Thanksgiving (or any family) table in mind.  It doubles as both a place card and a gift or the attendee.  With a thin Sharpie marker compose a simple note on why you are thankful for that person who is eating at your table. Or alternatively, share your favorite recipe with your guest. Of course, you could always do both!

“Thanks”giving Recipe Place Card
 
K & Company cardstock
Stampin Up! ribbon
Stampendous and Colorbok stickers
Anna Griffin “Rooster” stamp
Distress ink (Fired Brick)
Sharpie pens
Glue Dots®
 
Cut the K & Company cardstock to the desired size to create a “library card-style” pocket. (The finished size of the pocket pictured is 4 x 6 inches.)  Create side flaps and fold around the back of the pocket and attach using Glue Dots® glue lines to maintain hold.  Embellish using stamps, stickers and rub-ons if desired. Use several mini Glue Dots® to hold the double-tied ribbon in place. Make an accompanying card insert to fill the pocket. (The finished size of the card pictured is 3.75 x 5.5 inches).  Use a small piece of cardstock to write the appropriate name on the place card tab.

 

It’s the Pink Pumpkin, Charlie Brown! October 31, 2010

Since we are officially leaving the spookiest of seasons for one of hearth and harvest, I decided to do a sweet card celebrating the most popular of gourds.  While I didn’t think that I necessarily had my fill of all things orange and black, I’ve been dying to find a use for this delicious collection of Lemonade paper from Basic Grey.   Basic Grey is well known for their 6×6 pads of coordinating paper and once you find a design you like, it’s hard not to fall in love with each one.  The shrunken size of each unique design (that is, what you would find in a full 12 x 12 size) gives you a little of the exact print you want and you get to savor each delicious little pre-distressed inch.

It’s hard to not talk in culinary terms when you’re dealing with a line like Lemonade. But the weather is becoming cool and refreshing, so why not pumpkins?

PS I’ll be editing and uploading a video (hopefully) this week on how I made this card.  But just so you know, the pumpkin is a free piece of clip art I found on the web and paper-pieced together on this card.  I used dimensional tape to vary the different sections of the pumpkin and added some detail to each piece with fine Sharpie markers.  To make the edge detail, I used a set from Martha Stewart’s punch-around-the-page collection.

 

 
Follow

Get every new post delivered to your Inbox.